To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this kit to mount your SuperSprings leaf spring helper kit if your factory leaf springs are located above your axle and your spring pack is more than 2-3/4" thick.
Features:
For vehicles with factory leaf springs that set above the axle, this mounting kit ensures that SuperSprings operate silently when the vehicle isn't loaded. The kit includes 5-1/4 inch long U-bolts for applications where the spring pack measures greater than 2-3/4" high.
When factory springs set below the axle, the axle itself serves as a fulcrum for the helper leaf springs. However, for vehicles that have OEM springs that set above the axle, the 2-inch brackets in the mounting kit act as fulcrum points on the underside of the SuperSprings. Furthermore, the shackles at the ends of the helper springs hold them in place and pivot as the load is transferred to the SuperSprings. Because there is minimal preload tension in the installed SuperSprings, you get a quieter ride.
Bolt the mounting brackets to the factory spring packs using the extended U-bolts, cross plates, washers and nuts included in the kit. When installed correctly, the Nylok self-locking nuts won't loosen. After you install the mounting brackets, tighten the U-bolt nuts while the rear of the vehicle is still off the ground. After the springs are installed, lower the vehicle to the ground and retighten the U-bolt nuts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at the SuperSprings mounting kit for your OEM leaf springs above the axle. Now this kit is going to help you mount your SuperSprings leaf spring helper kit, if your factory springs are set above your axle. This is going to give you longer installation U-bolts for spring packs that are greater than 2 3/4 inches tall. And as you can see, this is my poor attempt at trying to just kind of put it together with the hardware just to kind of give you an idea of the hardware placement with these.
This kit is going to ensure that your SuperSprings operate silently when your vehicle isn't loaded, and it will maintain the minimal preload tension in the installed SuperSprings for a quieter ride. So this is going to install easily. It bolts onto the vehicle spring pack with the hardware there and the Nylock self-locking nuts are not going to loosen. Instructions are included to guide you through the simple installation process. The U-bolt length is 5 1/4 inches and this is directly from SuperSprings so you can have the confidence that this is going to work with your SuperSprings leaf spring helper kit.
Well, I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Use this kit to mount your SuperSprings leaf spring helper kit if your factory leaf springs are located above your axle and your spring pack is more than 2-3/4" thick.Perfectly holding leaf springs
Accurate
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Smoop
4/24/2024
supurb